"
Breaker breaker Buddy Bro!"
So
some of you, as in the hard core very few who do go on group outings know, I have been experiencing serious issues with the Dormy's CB radio. Could hear others some of the time but could not talk over it unless I was "
hitching a ride" on someone else's bumper!
After spending the big $$$ on a much better unit at
Flying J in Ehrenburg, AZ on our way to Lake Havafew, it was determined that my antenna was the actual item giving me trouble.
So on this past long assed trip to the Twin Lakes we stopped at the first big Truck Stop and I got juan of thems kickass truck antennas! Though that did the trick and I now could
pester the guys over the airwaves, The only place to install it was over the towel bar on the front bumper. Worked well but I did not like the look plus the nasty bracket chewed the paint right off it. Not to mention that it still needed the wire to go through the window, which is how the last 2 antenna wires got messed up. Also, the new main unit is much bigger than the tiny old one and just did not fit on the parcel tray. So it needed to find a better place to be.
Finnally got some time to work on this project and the "heat" wasn't as hot as it has been this week so I went at it yesterday. First, pix of the bumper chewing antenna bracket as it was:



Drilled and tapped the top passenger side door hinge.



It came up to 81" which will be "
okay" to stay on pretty much permanently since the door for the "drive-through" goes to 80". So while it does
ding it, once it passes that it clears everything else!
Next I decided to install the unit under the driver's seat. As you can see in the pix, it "clears" most everything so it is safe.






Finally, relocated the microphone to be next to the seat for easyer access.
